A Step by Step Guide to Measuring Your Space for a Counter-Depth Refrigerator
Step 1: Measure the Width
Start by measuring the width of the space where you intend to install the refrigerator. Use a tape measure to measure the width from one end to the other. Be sure to measure both the top and bottom of the space as walls may not be perfectly straight. Record the narrowest width measurement to ensure the refrigerator will fit comfortably.
Step 2: Measure the Height
Next, measure the height of the space. Measure from the floor to the ceiling or the bottom of any overhead cabinets. Again, measure at multiple points to account for any variations in height. Take the shortest height measurement to guarantee the refrigerator will fit within the space.
Step 3: Measure the Depth
Measure the depth of the space where the refrigerator will be placed. Counter-depth refrigerators are designed to align with standard countertops, so measure from the back wall to the front edge of the counter or cabinets. Make sure to measure at the widest point to ensure the refrigerator will fit flush with the surrounding surfaces.
Step 4: Account for Door Swing and Handles
Consider the space required for the refrigerator doors to swing open and any handles that protrude from the unit. Allow enough clearance for the doors to open fully without hitting nearby walls or cabinets. Measure the distance from the hinge side of the refrigerator to the furthest point the door will extend when open.
Step 5: Check Ventilation Requirements
Refrigerators need proper ventilation to function efficiently. Check the manufacturer's specifications for recommended clearances around the refrigerator for ventilation. Ensure there is enough space for air to circulate and dissipate heat effectively.
Step 6: Consider Flooring and Levelling
Take into account the flooring and any irregularities that might affect the refrigerator's leveling. Check if the floor is level and adjust the refrigerator's leveling feet accordingly to ensure it sits evenly.
Step 7: Double-Check Measurements
Before making a final decision and purchasing a refrigerator, double-check all measurements and clearances to ensure accuracy. It's better to be thorough during the planning phase to avoid any installation issues later on.